Order Air Filters

My Cart Checkout

Standard 1" Deep MERV 8 Filters

NOTE: The actual dimensions of the filter's length and width will vary up to ½" smaller than standard sizing to allow for a proper fit.

More information

How Many Filters? (12 minimum)

Cost:$0.00

Custom Made 1" Deep MERV 8 Pleated Filters

More information

Width: "
Height: "

How Many Filters? (12 minimum)

Cost:$0.00


Standard 1" Deep MERV 8 Filters

Standard MERV 8 filters remove 85% of airborne particles while eliminating allergens such as dust, pollen, mold spores, and pet dander and the advanced pleat technology provides less air flow resistance, with higher efficiency.

Custom Made MERV 8 Pleated Filters

1” deep custom or odd sized pleated filters made to order per customer requested exact size.
Rated at MERV 8 efficiency.

Custom and Odd-Size Air Filter Order Form

Custom Air Filter Ordering Instructions:

  • The easiest way to make sure you order the correct size is to measure your current air filter's length and width with a tape measure. We will make the length and width to your specifications within a tolerance of +0" -1/8". What this means is your size entered below will never be bigger but may be up to 1/8" smaller. This tolerance is typical of all custom made air filters and is the result of the manufacturing process. The actual depths are as follows:

    1" = 3/4"
    2" = 1 3/4"
    4" = 3 3/4"
  • The minimum size is 6" x 6" and the maximum is 24" x 36".
  • If a dimension exceeds 36" for 1" filters, or 25" for 2" filters, the filter will need to be created using two custom filters assembled together. This is a limitation of the materials used to build your filter.
  • Custom size air filters are sold in quantities of 6.
  • Custom size air filters require 4-5 business days to manufacture.
  • CUSTOM AIR FILTERS ARE NON-RETURNABLE. Make sure you enter the correct measurements before buying.

Custom Made Frame & Precut Filter Pad Kit

Kit includes: (1) permanent aluminum frame including (12) disposable double layered Antimicrobial polyester pads with an added tackifier to keep dust and dirt in its place. Precut to your filter frame length and width dimensions.
The aluminum frame is a strong heavy duty riveted manufactured support for the disposable filter pads custom made to your air conditioning system requirements.
This kit is an efficient and economical air filtration system for your heating and air conditioning unit, simply keep the frame for the life of your AC system and reorder (12) new pads every year or as needed.

Simply purchase a custom made aluminum frame built to your specifications and then change the media pad every month. Your initial purchase comes with 12 media pads which is good up to a year. Better yet, replacement pads are less expensive than purchasing disposable filters and come in 12 packs.

Frames and Pads Ordering Instructions:

The easiest way to make sure you order the correct size is to measure your current air filter's length and width with a tape measure. We will make the length and width of the frame to your specifications within a tolerance of +0" -1/8". What this means is your size entered below will never be bigger but may be up to 1/8" smaller. This tolerance is typical of all custom made air filters and is the result of the manufacturing process. The actual depths are as follows:?1" = 3/4"
?2" = 1 3/4"

  • The minimum size is 6" x 6" and the maximum is 24" x 36"
  • Each frame comes with 12 pads which will last 12 months or longer. You will only need to order one frame per unit. When you are running low on pads, simply reorder from the Replacement Media Pads page.
  • Orange/White media has a MERV 8 rating and is coated with a dry tackifier.
  • Frames are custom made and require 5 business days to manufacture.
  • Frames are NON-RETURNABLE. Make sure you enter the correct measurements before buying.

Frames and pads are an effective and economical alternative to disposable and pleated air filters without sacrificing air filtration.

Precut Filter Pads

Double layered Antimicrobial polyester pads with an added tackifier to keep dust and dirt in its place. Precut to your filter frame length and width dimensions.

Price is for 12 pads for a year supply (or as needed).

Dual-Ply
Multiple denier fibers, gives distinct dual density providing maximum dust holding capacity. The coarse, open structure of the white, air entering side, will depth load. The orange, dense downstream side, prevents dust from passing through the media.

Tackifier
Our Orange/White media has a dry tackifier applied uniformly coating the downstream orange side of the media increasing the dirt holding capacity.

Standard 2" Deep MERV 8 Filters

Standard MERV 8 filters remove 85% of airborne particles while eliminating allergens such as dust, pollen, mold spores, and pet dander and the advanced pleat technology provides less air flow resistance, with higher efficiency.